You are Here:
Linux Lite 6.6 FINAL Released - Support for 22 Languages Added - See Release Announcement Section



Installing onto a USB stick for a home server advice?

Author (Read 4498 times)

0 Members and 1 Guest are viewing this topic.

Re: Installing onto a USB stick for a home server advice?
« Reply #5 on: July 11, 2020, 03:51:04 AM »
 

Şerban S.

  • Şerban
  • PayPal Supporter
  • I come here a lot
  • *****
  • 326
    Posts
  • Reputation: 16
  • Linux Lite Member
    • View Profile
    • Forum

  • CPU: Intel® Core™ i7-4790

  • MEMORY: 16Gb

  • VIDEO CARD: Intel® HD Graphics 4600 + NVidia GK107 (GeForce GT630 OEM)

  • Kernel: 5.x
Hello! :)

Any advice on installing the OS onto the USB stick?  Things I should do or not do?

I installed some distros using USB sticks. Speed was way out of usability. A server is supposed to run on the fastest media available.

[...] My two cents using USB keys... but the fast ones.
Sandisk Ultra's or Extreme for example. [...]

While nobody can state that "beyond any reasonable doubt", this is my approach to this:

Use Gnome Disks to measure the speed of the drive.
Step 1
After the test completion, a diagram will be shown.
Make a screen capture of the diagram. Save it under a meaningful name.
Test all partitions of the drive, make a screen capture for each.
Step 2
Plug and test the USB candidate for server deployment. Make a screen capture for this, too.
Repeat the steps for each available USB stick.
Step 3
Use an image viewer to compare the test results for each drive.

Here is a sample of a SSD ADATA SU650, 240 GB (223 GB), main partition, /dev/sda3/:

https://www.facebook.com/photo.php?fbid=3049320371782520

While getting this kind of results on a stick is unlikely, you can obviously test a classic HDD and after comparing the results, you can make the best decision regarding which stick fits the closest to the server's speed requirements.
Since you have 6 TB HDDs, a good idea is to test those and compare with the stick's speed.
The closer you get to the HDDs speed, the better.
I recommend you to avoid any stick that is under 40 MB/s (2400 MB/min). The higher, the better.
You need to bare in mind that heat is critical, and it slows down any NAND media, be it stick or SSD. The Joule effect has nothing to do with my opinions regarding a manufacturer or another. It's just a physics law. It simply acts with or without my consent or anyone else's.
Therefore, given the fact that the server is going to work many hours, the drive wil get hot at some point in time. This leads to bad sectors and in fact, it's what kills any storage of any kind, including optical media.

Good luck! :)


"It's easy to die for an idea. It's way harder TO LIVE for your idea!"
Current Machine:
 Dell Precision T1700, 16 GB RAM, SSD Kingston A400, 480 GB.
Laptop:
 ASUS X200MA , Intel® Celeron® N2830, 2 GB RAM, SSD Kingston A400, 480 GB.
 

Re: Installing onto a USB stick for a home server advice?
« Reply #4 on: July 10, 2020, 02:29:44 PM »
 

Moltke

  • Platinum Level Poster
  • **********
  • 1134
    Posts
  • Reputation: 126
  • Linux Lite Member
    • View Profile

  • CPU: amd athlon 64 x2

  • MEMORY: 4Gb

  • VIDEO CARD: amd radeon hd 6750

  • Kernel: 5.x
So I'm retiring my old server, a HP DL380 G4 with Windows Server 2012, at my home.

I bought a used dell poweredge R330 w/ xeon 1270 v5 and 16GB of ECC ram for dirt cheap since the casing was damaged on the back but does not impact the server at all.  It only has 4x 3.5 sas hotswap bays on the front.  No big deal.  Very quiet 1u server, a rarity.

I updated all bios and firmware for ALL hardware, including the power supplies firmware.

It does have one internal usb port though and instead of wasting the 4x 6TB SAS3 drives I have, why not throw the OS onto a 64GB USB stick I have laying around.

Any advice on installing the OS onto the USB stick?  Things I should do or not do?

It is possible. Just install it like you would in a HDD. You'll need to burn the .iso either to a USB or a DVD, boot the system from that device and install it onto your 64GB stick. I have a couple of distros installed that way and they work just fine. Persistence would be good but then you wont be able to update the kernel when/if you need/want to, at least not in an easy way.
Without each others help there ain't no hope for us :)
Need a translation service? https://www.deepl.com/es/translator
 

Re: Installing onto a USB stick for a home server advice?
« Reply #3 on: July 10, 2020, 08:55:34 AM »
 

TheDead

  • Gold Level Poster
  • *******
  • 936
    Posts
  • Reputation: 92
  • Linux Lite Worshipper
    • View Profile
    • My OpenDesktop Projects

  • CPU: HAL9000

  • MEMORY: 2Gb

  • VIDEO CARD: Quantum State VR v.3

  • Kernel: 4.x
Hi!

My two cents using USB keys... buy the fast ones.
Sandisk Ultra's or Extreme for example.
I changed all my keys to those a few years ago and never looked back.

PS: Was able to make a Windows 10 bootable USB key and was faster than the internal hard drive. ;)
Edit:Typos, again...
« Last Edit: July 11, 2020, 01:25:13 PM by TheDead »
- TheDead (TheUxNo0b)

If my blabbering was helpful, please click my [Thank] link.
 

Re: Installing onto a USB stick for a home server advice?
« Reply #2 on: July 09, 2020, 10:17:54 PM »
 

firenice03

  • Rockin' the FREE World
  • Global Moderator
  • Platinum Level Poster
  • *****
  • 1848
    Posts
  • Reputation: 284
  • Linux Lite Member
    • View Profile

  • CPU: AMD E2//Atom X5//AMD Phenom II X2

  • MEMORY: 4Gb

  • VIDEO CARD: AMD Mullin Radeon R2//Intel//AMD/ATI RS880

  • Kernel: 5.x
It does have one internal usb port though and instead of wasting the 4x 6TB SAS3 drives I have, why not throw the OS onto a 64GB USB stick I have laying around.

Any advice on installing the OS onto the USB stick?  Things I should do or not do?

@icedigger
You could... You would want persistence, the manual has info for setting up in LL5.x ... But may still be slow...


But if it was me... and depending how you planning to set the 4 disks up... RAID etc etc etc ..
Might want to look/try LVM, allocate space to a Volume Group(s) with Logical Volumes - you can carve up and expand in the future as needed (depending how much space).
I have my LL4.8 laptop set up with LVM - at work we use this the majority. But I wanted to play with LVM's in "Ubuntu" more so LL it is.. It worked better to create the LVM ahead of time then install - if you go this route....




LL4.8 UEFI 64 bit ASUS E402W - AMD E2 (Quad) 1.5Ghz  - 4GB - AMD Mullins Radeon R2
LL5.8 UEFI 64 bit Test UEFI Kangaroo (Mobile Desktop) - Atom X5-Z8500 1.44Ghz - 2GB - Intel HD Graphics
LL4.8 64 bit HP 6005- AMD Phenom II X2 - 8GB - AMD/ATI RS880 (HD4200)
LL3.8 32 bit Dell Inspiron Mini - Atom N270 1.6Ghz - 1GB - Intel Mobile 945GSE Express  -- Shelved
BACK LL5.8 64 bit Dell Optiplex 160 (Thin) - Atom 230 1.6Ghz - 4GB-SiS 771/671 PCIE VGA - Print Server
Running Linux Lite since LL2.2
 

Installing onto a USB stick for a home server advice?
« Reply #1 on: May 25, 2020, 04:55:25 PM »
 

icedigger

  • Patreon Supporter
  • Occasional Poster
  • *****
  • 90
    Posts
  • Reputation: 3
  • Linux Lite Member
    • View Profile

  • CPU: Threadripper 3960x

  • MEMORY: 32Gb

  • VIDEO CARD: 5700XT

  • Kernel: 5.x
So I'm retiring my old server, a HP DL380 G4 with Windows Server 2012, at my home.

I bought a used dell poweredge R330 w/ xeon 1270 v5 and 16GB of ECC ram for dirt cheap since the casing was damaged on the back but does not impact the server at all.  It only has 4x 3.5 sas hotswap bays on the front.  No big deal.  Very quiet 1u server, a rarity.

I updated all bios and firmware for ALL hardware, including the power supplies firmware.

It does have one internal usb port though and instead of wasting the 4x 6TB SAS3 drives I have, why not throw the OS onto a 64GB USB stick I have laying around.

Any advice on installing the OS onto the USB stick?  Things I should do or not do?
« Last Edit: August 31, 2020, 06:29:19 PM by firenice03 »
Goliath - Threadripper 3960x, 64GB DDR4 3200, 1TB PCIe 4.0 M.2, 6TB HDD for Games, Creative AES 7 Soundcard, AMD 5700XT

Work Machine - Lenovo 13 Ryzen 4750U, 16GB DDR4, 2TB PCIe 3.1 M.2
 

 

-->
X Close Ad

Linux Lite 6.6 FINAL Released - Support for 22 Languages Added - See Release Announcement Section