Problem Summary LL2.0 32 bit
System HP dc7700 desktop dual core - 3GB RAM 160GB HDD IIyama Vision master Pro 541 CRT monitor with speakers
PCI Devices-
Host bridge : Intel Corporation 82Q963/Q965 Memory Controller Hub (rev 02)
VGA compatible controller : Intel Corporation 82Q963/Q965 Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Communication controller : Intel Corporation 82Q963/Q965 HECI Controller (rev 02)
IDE interface : Intel Corporation 82Q963/Q965 PT IDER Controller (rev 02) (prog-if 85 [Master SecO PriO])
Serial controller : Intel Corporation 82Q963/Q965 KT Controller (rev 02) (prog-if 02 [16550])
Ethernet controller : Intel Corporation 82566DM Gigabit Network Connection (rev 02)
USB controller : Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
USB controller : Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
USB controller : Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Audio device : Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
PCI bridge : Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
USB controller : Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
USB controller : Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
USB controller : Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
PCI bridge : Intel Corporation 82801 PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
ISA bridge : Intel Corporation 82801HO (ICH8DO) LPC Interface Controller (rev 02)
IDE interface : Intel Corporation 82801H (ICH8 Family) 4 port SATA Controller [IDE mode] (rev 02) (prog-if 8a [Master SecP PriP])
LL2.0 Live CD runs OK once fully loaded BUT during loading whilst the initial feather countdown screen appears OK, the next sequence whilst loading from DVD send the screen into wild oscillations along the vertical axis starting at the centre. I needed to switch the screen off at this stage as I was concerned for its electronics. Switching the screen on again whn all was loaded. The PC performed well although burning DVD was not tested. LAN, sound , resolution etc OK. Some fiddling with Pulse setting needed for SKYPE outgoing.
The problems really came when trying to do a full install. The 160 GB HDD was originally partitioned into 145 GB for Vista and 15 GB for HP Recovery software. There was free space on the HDD first partition of circa 15GB into which I hope LL2.0 would be loaded.
On LL2.0 install did NOT give me the option 1) install alongside Vista Looked at the last option - custom partition. But as newbie out my comfort zone. So “QUIT” from that stage. - DVD tray opened - Live DVD removed and then rebooted computer to find it hang - black screen flashing cursor.. Unfortunately my DVD recovery did not give me the MBR recovery option so ended up reformatting. Fortunately the key data had been backed up - little important lost.
Persevere
So with a clean install of VISTA and a massive 120 GB spare room on partition 1, I tried to fully install LL2.0 from the full DVD. This time all went smoothly. HOWEVER it did not appear to give me the option for dual install IF the partition for LL2.0 chosen was only10GB; i.e I had to choose a greater partition size.
BUT then, on rebooting and finding the booting options, Vista option worked fine/smoothly, but the LL2.0 option threw the screen into the wild oscillation stage again. Unfortunately I could not live with this and so cut my losses. This PC is my main work PC
For now the PC is running on faultlessly with MINT MAYA 32 bit full install. However want to go back to LL2.0. at some stage. LL1.08 running faultlessly on my Linux learning old Tosh A10 laptop AND LL2.0 32 bit running equally as well on my Fujitsu Siemens Amilo Si1520 work laptop. Have not tried Burner or remote screen/projector port yet
Sorry for long diatribe, but I hope it will be of some help.
BTW the HP dc 7700 ( described above) works fine with puppy linux precise 5.7.1 from a USB stick.
