Cannot install lite on SSD

[fundurobob]

Thanks for your reply.

I am only installing Lite on the Fujitsu. 

Regards

[firenice03]

Couple things...
If you're trying to dual boot with W10 make sure Fast Startup is disabled. (https://www.windowscentral.com/how-disable-windows-10-fast-startup)


Then if UEFI (bios) and Secureboot is set to Legacy/disabled

The above items need to be set accordingly in order to install...


The install guide if you haven't yet:
https://www.linuxliteos.com/manual/install.html#installguide


Short and skinny. Once the Installer launches you'll partition a portion of the drive and/or format. Choose what you created for E, if this is where you want LL installed; it won't be listed as E.
You'll format as EXT4 and label  "/"


Good Luck and Welcome

[fundurobob]

Hi all

I'm trying to revive a Fujitsu Amilo 1705 with an 120gb SSD and installing 'Lite' 3.6.

So far, I can get Lite to display the initial pages in 'safe' mode but it will not load onto the SSD.
From (my) memory it displays a panel with various tabs for internet, installing software et al. I couldn't get it to do anything else, so I figured  the only way forward seemed to go for the desktop option to install on a hard drive - which didn't work as it couldn't see the SSD.

SSD has been formatted NTFS and given a E: label since I had to do this on my main W10 (urghh!) and I'm wary of confusing and crashing it so rather than give it an c: - I settled on E;. It is the only drive on the Fujitsu.

I did use MBR as it seemed in sync with an old computer.

If it is a NTFS problem I'm not sure what to change it too or how to. I'm using Western digital data lifeguard diagnostics.

Any thoughts?