Linux Lite Forums

Hello,


This printer is correctly working under LL 4.8 from several PC's.
Under LL 5.0 I get message "rendering completed". And printer tasks are stopped and stay in the printer queue.


I downloaded the most recent printer driver from HP site (as HP is now managing Samsung laser printers), installation without any problem.
The printer is founded by LL, I am able to get information concerning toner level from "properties" panel.


Firewall is disabled.


Avahi returns :

Welcome to Linux Lite 5.0 pnp

mercredi 01 juillet 2020, 17:30:56
Memory Usage: 992/7942MB (12.49%)
Disk Usage: 19/110GB (18%)
Support - https://www.linuxliteos.com/forums/ (Right click, Open Link)

pnp  ~  avahi-browse --all --ignore-local --resolve --terminate
+ wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A)        Internet Printer    local
+ wlp3s0 IPv4 LIVEBOX                                      Web Site            local
+ wlp3s0 IPv4 LIVEBOX [b8:26:6c:79:54:a1]                  Workstation          local
+ wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A)        PDL Printer          local
+ wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A)        UNIX Printer        local
= wlp3s0 IPv4 LIVEBOX                                      Web Site            local
  hostname = [LIVEBOX.local]
  address = [192.168.1.1]
  port = [80]
  txt = []
= wlp3s0 IPv4 LIVEBOX [b8:26:6c:79:54:a1]                  Workstation          local
  hostname = [LIVEBOX.local]
  address = [192.168.1.1]
  port = [9]
  txt = []
+ wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A)        Web Site            local
= wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A)        Web Site            local
  hostname = [SEC84251905E24A.local]
  address = [192.168.1.154]
  port = [80]
  txt = ["XRASelfReg=3"]
+ wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A)        _privet._tcp        local
= wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A)        _privet._tcp        local
  hostname = [SEC84251905E24A.local]
  address = [192.168.1.154]
  port = [80]
  txt = ["cs=online" "id=" "type=printer" "url=https://www.google.com/cloudprint" "ty=Samsung SEC84251905E24A" "note=Samsung Cloud-Ready Printer C43x Series" "txtvers=1"]
Échec de résolution du service « Samsung C43x Series (SEC84251905E24A) » de type « _ipp._tcp » dans le domaine « local »  : Temps d'attente écoulé
Échec de résolution du service « Samsung C43x Series (SEC84251905E24A) » de type « _pdl-datastream._tcp » dans le domaine « local »  : Temps d'attente écoulé
Échec de résolution du service « Samsung C43x Series (SEC84251905E24A) » de type « _printer._tcp » dans le domaine « local »  : Temps d'attente écoulé
pnp  ~ 


Thanks in advance for your help and informations

Hello !
I ran a test using LL5.0 USB key to boot on. Start OK. I didn't install additional driver or piece of software.
I started Samsung printer and go to "printer" panel from "system" entry of the main menu.
My Samsung printer was rapidly detected but i got message "Server-error-internal-error".

Hello,

I ran some testing  after a clean LL 5.0 reinstall.
I alway get same problem.
Comparing  printer parameters LL4.8 vs LL 5.0 show many differences :
In both cases, printer driver is the same version : 1.00.39_01.17, and I defined printer as using IPP protocol.

LL 4.8 :
- driver appears as C43x.ppd
- driver version appears as Version 1.0
- Printer name : Samsung C43x

LL 5.0 :
- driver is ippeve.ppd
- driver version 2.2
- printer name looks "fancy" : Samsung-C43x_series_%SEC%84251%.........

The main difference is the CUPS version, I deduct (may be I am wrong...) theproble come from this new version of CUPS distributed with LL 5.0.

Hello,

I re-installed LL 5.0 and don't download printer driver from Samsung site.

During installation I selected Generic IPP Everywhere driver and it works !

So, where is the incompatibilty ? Either CUPS 2.3.x, either Samsung driver downloaded from Samsung site.

Hello,

I just discovered a very important information about Samsung printers :

https://www.bchemnet.com/suldr/forum/ind...opic=366.0

In two words : Samsung printers will not be supported by new releases of operating system as HP doesn't maintain driver's updates.

Hello,

Back to LinuxLite 4.8 to be able to use this Samsung printer.....

Hello,

I did some testing using LL 5.2....and Samsung Printer  C430W is now working fine !

Very simple :
When looking for a driver during printer definition, just tell to CUPS to use driver for Samsung C410 as this printer is supported.
I guess this driver is from Gutenberg and included in CUPS.

I did that as I saw Samsung drivers for both C 410 and C430 were the sames in the past.