Linux Lite Forums - Resizing a partition

Pages: 1 2

(04-29-2017, 12:30 PM)bitsnpcs link Wrote: [ -> ]Is this having windows (re; dos and ntfs) as the first partition?

The first partition is the home of Windows 7.

I think it makes it more complex when booting from Windows and Linux, as they each are using a different method to boot usually, but you can do both of course, there are some on the forum in addition to yourself who also do this. Hopefully they can help you.

I have 1 windows computer, and a 3 Linux Lite computers, but at each one it is only 1 OS installed, I don't dual boot etc. I have other distros in Linux Lite (ultimately controls them) using Virtual Box, so I can test things at a future time.(Python, and scripts)

Are you booting from Windows MBR and then using this to boot also Linux when selected at the start up menu?
Or it has Grub, and installed after this, Windows was installed first ?

(04-29-2017, 01:35 PM)bitsnpcs link Wrote: [ -> ]I have 1 windows computer, and a 3 Linux Lite computers, but at each one it is only 1 OS installed, I don't dual boot etc. I have other distros in Linux Lite (ultimately controls them) using Virtual Box, so I can test things at a future time.(Python, and scripts)

Maybe this is an option for the future. I've always prefered to install systems directly.

(04-29-2017, 01:35 PM)bitsnpcs link Wrote: [ -> ]Are you booting from Windows MBR and then using this to boot also Linux when selected at the start up menu?
Or it has Grub, and installed after this, Windows was installed first ?

Windows 7 was installed first. Some linux distributions after it, always with grub as boot loader, like it is now. Last installation, after I have had some problems with the partition of an older installation of Linux, was Linux Lite 3.4.

I in this moment using a linux installation at sda12 on the same hard drive. (The distro is called Emmabuntüs. It's good for older computers and families with little children.)

I understand how you explained to me, thank you Smile

My oldest computer, it was in around year 2000, it is a P4 1GB ram, I use LL 2 series (late in 2 series).

I now have played back my backup image of LL's home directory:

I've build a new partition in the same place with GParted.
I've copied the backup image with [tt]dd[/tt] to the partition.

In fact I do use currently LL again. But I've failed to resize the home partition -- until now.

(04-29-2017, 06:56 PM)bitsnpcs link Wrote: [ -> ]My oldest computer, it was in around year 2000, it is a P4 1GB ram, I use LL 2 series (late in 2 series).

My system is this:

Code:

System:    Host: central-desktop Kernel: 4.4.0-75-generic x86_64 (64 bit) Desktop: Xfce 4.12.3

           Distro: Ubuntu 16.04 xenial

Machine:   Mobo: ASRock model: N68-S Bios: American Megatrends v: P1.60 date: 09/21/2009

CPU:       Dual core AMD Athlon II X2 240 (-MCP-) cache: 2048 KB 

           clock speeds: max: 2800 MHz 1: 2100 MHz 2: 2100 MHz

Graphics:  Card: NVIDIA C61 [GeForce 7025 / nForce 630a]

           Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)

           Resolution: [email protected]

           GLX Renderer: GeForce 7025 / nForce 630a/integrated/SSE2 GLX Version: 2.1.2 NVIDIA 304.135

Audio:     Card NVIDIA MCP61 High Definition Audio driver: snd_hda_intel Sound: ALSA v: k4.4.0-75-generic

Network:   Card: NVIDIA MCP61 Ethernet driver: forcedeth

           IF: enp0s7 state: up speed: 100 Mbps duplex: full mac: <filter>

Drives:    HDD Total Size: 1006.2GB (15.7% used) ID-1: /dev/sda model: ST1000DM003 size: 1000.2GB

           ID-2: USB /dev/sdb model: Flash_Disk size: 4.0GB

           ID-3: USB /dev/sdc model: Transcend_2GB size: 2.0GB

Partition: ID-1: / size: 29G used: 6.9G (26%) fs: ext4 dev: /dev/sda16

           ID-2: /var size: 3.7G used: 588M (17%) fs: ext4 dev: /dev/sda18

           ID-3: /home size: 1.9G used: 1.1G (59%) fs: ext4 dev: /dev/sda20

           ID-4: /tmp size: 5.6G used: 13M (1%) fs: ext4 dev: /dev/sda19

           ID-5: swap-1 size: 2.05GB used: 0.00GB (0%) fs: swap dev: /dev/sda10

           ID-6: swap-2 size: 3.22GB used: 0.00GB (0%) fs: swap dev: /dev/sda7

           ID-7: swap-3 size: 0.46GB used: 0.09GB (19%) fs: swap dev: /dev/zram0

           ID-8: swap-4 size: 0.46GB used: 0.09GB (19%) fs: swap dev: /dev/zram1

RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present

Sensors:   System Temperatures: cpu: 30.5C mobo: N/A

           Fan Speeds (in rpm): cpu: N/A

Info:      Processes: 183 Uptime: 4:09 Memory: 1150.1/1747.7MB Client: Shell (bash) inxi: 2.2.35

I've fixed the problem of the home partition running out of space without resizing the partition.

I checked with dd, which directories in /home are taking the most space. The result: It'was not home in general, but "/home/johnd/Downloads".
I moved the two biggest directories from the directory "/home/johnd/Downloads" to my central Partition for user accounts from different Linux installations. This partition has about 300 GB, with 166 GB free.
I renamed the local directory Downloads to "Downloads_local".
I created a symbolic link in the local home dir to the dir Downloads in the central home partition.

The resulting free space

Code:
johnd@central-desktop:~$ sudo du -hs /home; LANGUAGE=en df -h /home

616M    /home

Filesystem      Size  Used Avail Use% Mounted on

/dev/sda20      1.9G  619M  1.2G  35% /home

With this structure

Code:
johnd@central-desktop:~$ ls -la /home/johnd | grep "^l"

lrwxrwxrwx  1   36 Apr 16 02:53 Documents -> /media/central_home/besto/Dokumente/

lrwxrwxrwx  1   35 Apr 17 16:03 Dokumente -> /media/central_home/besto/Dokumente

lrwxrwxrwx  1   36 Apr 30 02:21 Downloads -> /media/central_home/besto/Downloads/

lrwxrwxrwx  1   32 Apr 16 23:43 Pictures -> /media/central_home/besto/Bilder

lrwxrwxrwx  1   32 Apr 21 22:06 Videos -> /media/central_home/besto/Videos

Great work JohnD Smile

I have only just begun learning symbolic links, I begin Chapter 6 of the Command Line Book by W. Shotts, I began a first look at symbolic links and hard links in the previous Chapter and made a few beginner ones.
So it means downloads are now downloaded directly to the Central home partition, and in the newly named Downloads_local it has the symbolic links to the files so they are usable from here too ?
Will you have to create symbolic links manually for each new download, or have you set it to make these automatically some how ?

For me it sounds a very complex and advanced set up, but it is also very interesting how it works.

(04-30-2017, 05:13 AM)bitsnpcs link Wrote: [ -> ]Great work JohnD

THX

(04-30-2017, 05:13 AM)bitsnpcs link Wrote: [ -> ]So it means downloads are now downloaded directly to the Central home partition [...]

Yes, the symbolic link "/home/Downloads" has the consequence, that all downloads, which are saved normally to "/home/Downloads" now are saved in /media/central_home/besto/Downloads", which is on another partition.

(04-30-2017, 05:13 AM)bitsnpcs link Wrote: [ -> ]So it means downloads are now downloaded directly to the Central home partition, and in the newly named Downloads_local it has the symbolic links to the files so they are usable from here too?

No, Downloads_local is a directory with no connection to the symbolic linked directory. There are just some files in this directory, which I have saved in the former Downloads directory and I wanted to have a second Download directory which is not linked, if I would like to save a Download not in the linked directorcy.

(04-30-2017, 05:13 AM)bitsnpcs link Wrote: [ -> ]Will you have to create symbolic links manually for each new download, or have you set it to make these automatically some how ?

No, you have to define the link one time.

One time you have to define a directory for mounting the partition you would like to use for user files:

Code:
johnd@his-desktop$ sudo mkdir /media/central_home

You can use another dir name, which is not so pretentious. I've used "central_home" like "Central Intelligence". Wink

Now -- in my case -- there is this new directory in "[tt]/media[/tt]" called "[tt]central_home[/tt]", and you have to mount the partition for the user files to it. In my case the partition to mount is [tt]/dev/sda[/tt].

Code:
johnd@his-desktop$ sudo mount /media/central_home /dev/sda9

You can give the mount command the type of the file system it should mount, but in most cases it's unnecessary. ("[tt]johnd@his-desktop$ sudo mount -t ext4 /media/central_home /dev/sda9[/tt]", "ext4", if the partition to mount is formatted to ext4 files system.)

A problem is, that you have to write the mount in the file "[tt]fstab[/tt]" in the directory "[tt]/etc[/tt]", because only then it will be mounted automatically, if Linux was shutdown. In my case [tt]fstab[/tt] for Linux Lite is this:

Code:
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

# / was on /dev/sda16 during installation

UUID=d2b976ef-c177-4eeb-ba8a-9c0475e9c034 /               ext4    errors=remount-ro 0       1

# /home was on /dev/sda20 during installation

# UUID=0dac0966-47b8-4554-a5c8-4e6c6f50524c /home           ext4    defaults        0       2

UUID=0dac0966-47b8-4554-a5c8-4e6c6f50524c /home           ext4    defaults        0       2

# /opt was on /dev/sda17 during installation

UUID=c81ae448-a938-4758-9e1c-5caa1a87d030 /opt            ext4    defaults        0       2

# /tmp was on /dev/sda19 during installation

UUID=71e09fcb-bdcb-4516-8c63-4d4d5ccfbfb8 /tmp            ext4    defaults        0       2

# /var was on /dev/sda18 during installation

UUID=2f4c1bbe-6548-4c81-b7be-2f79c5b26c13 /var            ext4    defaults        0       2

# swap was on /dev/sda11 during installation

UUID=52a1d79c-d752-4904-b608-c2b66129a913 none            swap    sw              0       0

# swap was on /dev/sda7 during installation

UUID=a6ececfd-2af5-4877-abc4-52e90b7254ea none            swap    sw              0       0

# The central home partition:

UUID=3b77c81c-0afa-4c85-b160-e94458b1fabc /media/central_home ext4 defaults       0       2

johnd@johns-desktop:$

The last line says that [tt]/dev/sda9[/tt] should be mounted every time linux starts. Remarkable, that there is not written "[tt]/dev/sda9[/tt]", but "[tt]UUID=3b77c81c-0afa-4c85-b160-e94458b1fabc[/tt]" is another identification of my current "[tt]/dev/sda9[/tt]".

The UUID is an id of the partition. You got them with the command [tt]blkid[/tt]. For example:

Code:
johnd@johns-desktop:~$ blkid /dev/sda9

/dev/sda9: LABEL="home" UUID="3b77c81c-0afa-4c85-b160-e94458b1fabc" TYPE="ext4" PARTUUID="dcfb362e-09"

johnd@johns-desktop:~$

It's an unique id. The following -- for example -- is the complete answer of [tt]blkid[/tt], if I do not specify a single partition:

Code:
johnd@johns-desktop:~$ blkid

/dev/sda1: LABEL="DRIVE_C" UUID="AEAC7810AC77D177" TYPE="ntfs" PARTUUID="dcfb362e-01"

/dev/sda2: LABEL="SchM-CM-<lerdaten" UUID="A8F46C31F46C0442" TYPE="ntfs" PARTUUID="dcfb362e-02"

/dev/sda3: LABEL="Debian-Root" UUID="2d3f7e8e-cc94-493b-b3e2-0323d3a54bb1" TYPE="ext4" PARTUUID="dcfb362e-03"

/dev/sda5: LABEL="Bodhi-Linux" UUID="e8aadbe5-d9a0-44ed-aedb-62c8bf9eb969" TYPE="ext4" PARTUUID="dcfb362e-05"

/dev/sda6: LABEL="Parsix" UUID="92ae1f00-704b-4888-9011-c98e95bda345" TYPE="ext4" PARTUUID="dcfb362e-06"

/dev/sda7: UUID="a6ececfd-2af5-4877-abc4-52e90b7254ea" TYPE="swap" PARTUUID="dcfb362e-07"

/dev/sda8: LABEL="usr" UUID="3f3f8ea3-a062-42ad-a903-f28ad02ade1d" TYPE="ext4" PARTUUID="dcfb362e-08"

/dev/sda9: LABEL="home" UUID="3b77c81c-0afa-4c85-b160-e94458b1fabc" TYPE="ext4" PARTUUID="dcfb362e-09"

/dev/sda10: UUID="52a1d79c-d752-4904-b608-c2b66129a913" TYPE="swap" PARTUUID="dcfb362e-0a"

/dev/sda12: LABEL="Emmabuntu" UUID="a02cfa39-bcb5-49b6-990a-d665df2ac2a1" TYPE="ext4" PARTUUID="dcfb362e-0c"

/dev/sda13: UUID="7c3ecf43-4968-481e-9624-f886a432a1a4" TYPE="ext4" PARTUUID="dcfb362e-0d"

/dev/sda14: UUID="a0a0c585-baf2-4b17-94d0-0ac116bb5af0" TYPE="ext4" PARTUUID="dcfb362e-0e"

/dev/sda15: UUID="6464a3ab-f5e1-4ca8-9d4d-589e32db2ee0" TYPE="ext4" PARTUUID="dcfb362e-0f"

/dev/sda16: UUID="d2b976ef-c177-4eeb-ba8a-9c0475e9c034" TYPE="ext4" PARTUUID="dcfb362e-10"

/dev/sda17: UUID="c81ae448-a938-4758-9e1c-5caa1a87d030" TYPE="ext4" PARTUUID="dcfb362e-11"

/dev/sda18: UUID="2f4c1bbe-6548-4c81-b7be-2f79c5b26c13" TYPE="ext4" PARTUUID="dcfb362e-12"

/dev/sda19: UUID="71e09fcb-bdcb-4516-8c63-4d4d5ccfbfb8" TYPE="ext4" PARTUUID="dcfb362e-13"

/dev/sda20: UUID="0dac0966-47b8-4554-a5c8-4e6c6f50524c" TYPE="ext4" PARTUUID="dcfb362e-14"

/dev/zram0: UUID="972fce57-c4a5-4467-8939-f6700cf9042b" TYPE="swap"

/dev/zram1: UUID="6dcb7408-752d-4526-86ca-77bf85c5ef1b" TYPE="swap"

johnd@johns-desktop:~$

Finally to create the symbolic link, I've done this:

Code:
johnd@his-desktop$ sudo ln -s /media/central_home/besto/Downloads ~/Downloads

"[tt]~/Downloads[/tt]" is short for "[tt]/home/johnd/Downloads[/tt]", and "[tt]~[/tt]" stands for the home dir of the currently logged in user.

Now "[tt]/home/johnd/Downloads[/tt]" is a shortcut, a symbolic link to "[tt]/media/central_home/besto/Downloads[/tt]".

(04-30-2017, 05:13 AM)bitsnpcs link Wrote: [ -> ]For me it sounds a very complex and advanced set up, but it is also very interesting how it works.

Ok. But it's really not my first linux installation. I've tried some distros and installed also some of them for a friend. But I'm trying to learn linux also now. In fact I'm preparing for LPIC 1 and LPIC 2.

Thank You for explaining Smile

It is a very interesting set up you have JohnD.

Pages: 1 2